Houston's humidity makes front-load door boots grow mildew quickly. Leave the door ajar between loads, run a tub-clean cycle monthly, and use the right amount of HE detergent; oversudsing is the number one cause of 'SUD', long-cycle and leak complaints we see.
Washing machine problems announce themselves loudly: a tub that won't drain, a spin cycle that shakes the laundry room, a door that won't unlock or a cycle that runs for hours. Most of them come down to a short list of parts (drain pump, lid lock or door lock, water inlet valve, pressure switch, drive belt, suspension rods, shock absorbers or a control board) and we stock those for the brands Houston owns most: Samsung, LG, Whirlpool, Maytag, GE, Kenmore and Frigidaire.
We repair high-efficiency top loaders, front loaders, older agitator machines, stacked laundry centers and 24-inch compact washers in townhomes and condos, including the all-in-one washer-dryer combos that are increasingly common in Houston apartments.
Washing Machine problems we fix
Pick the symptom that matches. Each page lists the likely causes in order and what you can check before we arrive.
Washer Not Draining
An obstructed or failed drain pump.
See causes & fixesWasher Not Spinning
A failed lid lock, door lock or drive component.
See causes & fixesWasher Leaking Water
A torn door boot (front load) or a failed drain pump or hose.
See causes & fixesWasher Won't Start
A failed lid lock or door lock, or a control board.
See causes & fixesWasher Not Filling
Clogged inlet screens or a failed water inlet valve.
See causes & fixesWasher Shaking or Walking
Worn suspension rods (top load) or shock absorbers (front load).
See causes & fixesWasher Making Grinding or Squealing Noise
A worn drive component, bearing or a foreign object in the tub.
See causes & fixesWasher Not Agitating
Worn agitator dogs, a sheared motor coupling or a failed shift actuator.
See causes & fixesWasher Smells Bad
Mildew in the door boot, a dirty pump filter or biofilm in the outer tub.
See causes & fixesWasher Stuck on a Cycle
A pressure sensor fault, slow drain or an unbalance the control can't correct.
See causes & fixesWasher Door Won't Unlock
Water still in the tub (drain fault) or a failed door lock.
See causes & fixesTypes we service
- Front-load
- HE top-load (impeller)
- Agitator top-load
- Stacked laundry centers
- Compact 24-inch
- Washer-dryer combos
What the visit looks like
Call, text or book online
Tell us the appliance, brand and symptom. A photo of the model tag lets us bring the exact part.
Diagnosis on site
The technician tests the appliance, finds the actual fault and quotes a flat price. $89 for the visit, credited when you approve.
Repaired, usually same visit
Most repairs finish from truck stock. If a part has to be ordered, we return as soon as it arrives. 1-year parts, 90-day labor warranty.
What washing machine repair costs
Lid switches, inlet valves and drain pumps are quick jobs; tub bearings and transmissions sit at the top and are sometimes not worth it on budget machines.
- Diagnostic
- $89, credited toward the repair
- Typical repair
- $130 – $420 parts and labor, quoted flat-rate before work starts
- Warranty
- 1-year parts, 90-day labor
Washing Machine brands we repair
Parts for the most common brands ride on the truck; the rest are usually 1–3 business days.
Washing Machine error codes by brand & model
Showing a code? These pages list every code for each model series and what it means. Or search all codes →
- Samsung front-load washer
- Samsung top-load washer
- LG front-load washer
- LG top-load washer
- Whirlpool top-load washer
- Whirlpool front-load washer
- Maytag top-load washer
- Maytag front-load washer
- Amana washer
- Kenmore 110 series washers & dryers
- Kenmore 796 series elite laundry
- Kenmore 401 series laundry
- GE Appliances washer
- Frigidaire washer
- Electrolux washer
- Bosch compact washer
- Miele washer