Houston · Harris, Fort Bend & Montgomery counties
Mon–Sat 7am–7pmSame-day & next-day appointments (713) 548-7587
  1. Home
  2. Problems
  3. Washer Repair
  4. Washer Shaking or Walking
Washer Repair · Houston, TX

Washer shaking violently or walking across the floor?

A washer that bangs, walks or sounds like a jet on spin has lost its suspension, is sitting unlevel, or still has its shipping bolts in. Worn suspension rods and shocks are the normal cause, and they're a quick fix.

One visit, 45–75 minutes Same-day in most of Houston 1-year parts, 90-day labor warranty
Quick diagnosis
Most likely cause
Worn suspension rods (top load) or shock absorbers (front load)
Typical repair time
One visit, 45–75 minutes
Service call
$89 diagnostic, credited to the repair

Why it's happening, in order of likelihood

Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.

  1. 1

    Worn suspension rods / springs (top load)

    The rods that hang the tub lose their damping. Every spin becomes a balance problem and the control may abort with a UE/uL code.

  2. 2

    Worn shock absorbers (front load)

    Shocks go soft; the drum slams the cabinet on spin.

  3. 3

    Unlevel machine or missing foot

    A washer rocking on one foot walks across the floor, especially on Houston's pier-and-beam floors.

  4. 4

    Shipping bolts never removed

    A new front loader with the transit bolts still in shakes the whole house.

  5. 5

    Tub bearing failure

    A roar on spin plus shaking means the bearing is gone. Significant repair.

  6. 6

    Unbalanced load

    One heavy item (a bath mat, a comforter) alone in the tub.

Check these before you call

Safe, no-tools checks. If none of them solves it, the next step is a technician.

  • Push on the corners of the washer; it shouldn't rock. Adjust the feet and lock the nuts.
  • Check the back of a front loader for shipping bolts if it's new or recently moved.
  • Try a balanced load; if it still shakes, the suspension is worn.
  • Listen for a roar on spin, which means the bearing.

Parts we typically replace

  • Suspension rods
  • Shock absorbers
  • Leveling feet
  • Tub bearing & seal
  • Counterweight bolts

Brand-specific notes

  • SamsungSamsung top loaders are known for suspension rod wear; UE/UC codes and a loud spin are the signal.
  • WhirlpoolWhirlpool Cabrio and Maytag Bravos: uL for unbalanced, and a roaring spin means the bearing.

Repair or replace?

Suspension parts are a routine repair. A bearing on a budget machine often isn't.

What happens on the visit

1

Describe the symptom

Tell us the brand, model and what it's doing. A photo of the model tag helps.

2

We diagnose, you approve

$89 diagnostic, credited to the repair. Flat-rate quote before any work.

3

Fixed, usually that visit

Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.

Questions about this problem

Can a shaking washer damage my floor?
Yes, and it can tear its own hoses loose. Stop using it on heavy loads until it's fixed.
Why does my front loader shake more than my old top loader?
Front loaders spin faster. Healthy shocks absorb it; worn ones don't.

Related washing machine problems

Washing Machine trouble? Same-day help.

Call or text (713) 548-7587 for a same-day appointment anywhere in Greater Houston. $89 diagnostic, credited toward your repair.

Call nowBook online