Codes show on the display; models without a full display use LED blink patterns that LG maps to the same codes. The lid must be closed (dE) and the load balanced (UE) before a spin will run.
LG Top-load washers: error codes & what they mean
11 codes explained for WT7300 / WT7305 / WT7400 / WT7405, WT7800 / WT7900 / WT7850 / WT7005, WT1101 / WT1201 / WT1501 / WT5070 / WT5270 models, with the part or problem behind each one. Same-day washing machine repair across Houston.
Models covered
Find the model number on the rating plate. Refrigerators: inside on the left wall above the top shelf. Washers: inside the door rim or on the back. Dryers: inside the door. Dishwashers: left edge of the door. Ranges: behind the storage drawer or on the frame.
- WT7300 / WT7305 / WT7400 / WT7405Current top loaders with TurboWash3D (WT7300CW, WT7305CV, WT7400CW, WT7405CW).
- WT7800 / WT7900 / WT7850 / WT7005Larger-capacity top loaders (WT7800CW, WT7900HBA, WT7850HWA, WT7005CW).
- WT1101 / WT1201 / WT1501 / WT5070 / WT5270 (older)2012–2018 models with the same code set.
Example model numbers
- WT7300CW
- WT7305CV
- WT7400CW
- WT7800CW
- WT7900HBA
- WT1101CW
- WT5070CW
LG top loaders share the front-load code vocabulary with one addition: E6, the clutch error on direct-drive top loaders. UE on these machines usually means the suspension rods have worn, and IE means the inlet screens or valve.
These washers fill and drain from the back and bottom, so OE and IE repairs involve pulling the machine out; dE is the lid switch and lock at the top.
LG top-load washer error codes
Filter by code or symptom. Meanings are the documented common ones for these platforms; the tech sheet inside your appliance is authoritative for your exact model.
| Code | What it means | What usually fixes it |
|---|---|---|
OE | Drain fault | Drain pump, hose or clogged filter. |
IE | Water inlet fault | Valves, screens, inlet valve. |
UE | Unbalanced load | Redistribute; worn suspension if it repeats. |
dE | Lid open or lid switch fault | Lid switch or lock. |
LE | Motor locked | Overload, hall sensor, rotor/stator. |
FE | Overfill | Inlet valve or pressure sensor. |
PE | Pressure sensor fault | Sensor or air hose. |
tE | Thermistor fault | Temperature sensor. |
E6 | Clutch error | Clutch assembly on top-load direct-drive models. |
PF | Power failure | Restart. |
SUD | Excess suds | Reduce detergent. |
No match in the main table; check the tables below or text us the code.
Messages that aren't faults
Things the display shows that don't mean a part has failed.
| Code | What it means | What usually fixes it |
|---|---|---|
CL | Child lock on | Hold the Child Lock key 3 seconds. |
tCL | Tub clean reminder | Run a Tub Clean cycle. |
Common failures on these models
- Suspension rod wear (UE and walking)
- Clutch assembly faults (E6)
- Lid switch and lock faults (dE)
- Drain pump debris (OE)
- Inlet valve and screens (IE)
Before you call
- Write down or photograph the exact code and which lights are lit before you reset anything; a reset can erase it.
- Reset once: switch the breaker off for 60 seconds, then back on. A code that returns is real.
- Check the basics the code points to (water valves open, drain hose not kinked, door fully closed, 240V breaker not half-tripped) using the table above.
- Text the code and a photo of the model tag to (713) 548-7587 so we arrive with the part.