Houston · Harris, Fort Bend & Montgomery counties
Mon–Sat 7am–7pmSame-day & next-day appointments (713) 548-7587
  1. Home
  2. Brands
  3. Samsung
  4. Front-Load Washer
Samsung · Washer Repair · error codes

Samsung Front-load washers: error codes & what they mean

16 codes explained for WF42 / WF45 / WF50 / WF56, WV55 / WV60, WF2xx / WF3xx / WF4xx models, with the part or problem behind each one. Same-day washing machine repair across Houston.

4 model series Most repairs in one visit 1-year parts, 90-day labor warranty

Models covered

Find the model number on the rating plate. Refrigerators: inside the fresh-food section on the left wall. Washers: inside the lid or door frame, or on the rear panel. Dryers: inside the door. Dishwashers: on the edge of the door. Ranges: inside the storage drawer or on the frame behind the door.

  • WF42 / WF45 / WF50 / WF56Standard 27-inch front loaders: WF45R6100, WF45T6000, WF45B6300, WF50A8800, WF56H9100.
  • WV55 / WV60FlexWash two-in-one units with the small top washer.
  • WF2xx / WF3xx / WF4xx (older)WF218, WF328, WF330, WF419, WF448 from 2008–2014.
  • WD53 / WD11 / WD90Washer-dryer combos (WD53DBA900, WD11, WD90).

Example model numbers

  • WF45R6100AW
  • WF45T6000AW
  • WF45B6300AV
  • WF50A8800AV
  • WF56H9100AG
  • WF419AAW
  • WV60M9900AV
How codes are displayed

Codes show on the digital display as a letter-number pair; the letter changed from E to C around 2015 (5E and 5C are the same drain fault). The debris filter is behind the small door at the bottom front and is the first stop for 5C, LC and SUD.

Samsung front loaders report almost every fault as a two-character code, and most of those faults are mechanical and repairable the same visit: a drain pump packed with debris (5C), a door lock that won't latch (dC), a leak sensed in the base (LC), worn shocks (UC) or a failed heater (HC).

The codes to take seriously are LC, because the base pan has water in it and the leak source has to be found, and 3C, which is a motor or drive fault that is worth a professional test before any parts are bought.

Samsung front-load washer error codes

Filter by code or symptom. Meanings are the documented common ones for these platforms; the tech sheet inside your appliance is authoritative for your exact model.

CodeWhat it meansWhat usually fixes it
4C / 4ENo water supplySupply valves, kinked hoses, clogged inlet screens, failed inlet valve or low pressure.
5C / 5E / ndDrain faultDebris filter behind the lower cover, drain pump, hose or standpipe.
3C / 3EMotor drive faultMotor, hall sensor or main board; also triggered by an overloaded drum.
UC / UE / UrUnbalanced load or control can't balance itRedistribute the load; repeat codes mean shocks or suspension.
dC / dE / dC1 / dE1Door not closed or lockingDoor latch, lock assembly or wiring. On AddWash models dC3 points at the small door.
LC / LE / LC1Leak detected in the baseDoor boot, hose, dispenser overflow or pump seal; the leak sensor in the base pan tripped.
OC / OEOverflow / water level too highInlet valve not closing or pressure sensor fault.
HC / HEWater heater fault (hot water models)Heater element or thermistor on models with internal heating.
tC / tE / tC1Temperature sensor faultThermistor open or shorted.
1C / 1EWater level (pressure) sensor faultPressure sensor or its air hose.
8C / 8EVibration (MEMS) sensor faultVibration sensor or its connector.
AC / AE / AC6Communication error between boardsHarness between main board and user interface, or a failed board.
bC / bE / bE2Stuck buttonKeypad or UI board.
9C / 9E1Voltage out of rangeHousehold voltage low or high; check the outlet and breaker before suspecting the board.
SUD / 5UD / SdExcess sudsToo much or non-HE detergent; pump filter cleaned.
HotWater too hot to open doorWait for the drum to cool; not a fault.

Common failures on these models

  • Drain pump obstructions and failures (5C / nd)
  • Door boot mildew and tears causing leaks (LC) in Houston humidity
  • Worn shock absorbers producing UC on every spin
  • Door lock assemblies (dC) and AddWash door switches (dC3)
  • Suds-related long cycles from detergent overdosing (SUD / 5UD)

Before you call

  • Write down or photograph the exact code and which lights are lit before you reset anything; a reset can erase it.
  • Reset once: switch the breaker off for 60 seconds, then back on. A code that returns is real.
  • Check the basics the code points to (water valves open, drain hose not kinked, door fully closed, 240V breaker not half-tripped) using the table above.
  • Text the code and a photo of the model tag to (713) 548-7587 so we arrive with the part.

Samsung front-load washer questions

Why does my Samsung washer show 5C after I cleaned the filter?
The drain hose may be kinked or pushed too far into the standpipe, or the pump itself has failed. If the pump hums without moving water, it needs replacing.
What does UC mean on my washer?
Unbalanced. The control is refusing to spin a load it can't balance. If balanced loads still trigger it, the shocks are worn, which we replace in one visit.
Do you repair every Samsung front-load washer model?
Yes, out of warranty. Text us the full model number from the rating plate and the code on the display, and we'll bring the right part. If the unit is still under Samsung's factory warranty, call the manufacturer first.

Related washing machine problems

Samsung showing a code? We'll bring the part.

Text the code and a photo of the model tag to (713) 548-7587. Same-day appointments across Houston.

Call nowBook online