Houston · Harris, Fort Bend & Montgomery counties
Mon–Sat 7am–7pmSame-day & next-day appointments (713) 548-7587
  1. Home
  2. Services
  3. Garbage Disposal Repair
Garbage Disposal Repair · Houston, TX

Garbage Disposal repair in Houston

Garbage disposal repair and replacement in Houston: jams, humming motors, leaks, resets and dishwasher drain connections, done in one visit.

Same-day appointments 1-year parts, 90-day labor warranty 4 brands serviced

Garbage disposals fail in three ways: they hum but don't spin (jammed flywheel or seized motor), they do nothing at all (tripped reset, breaker, switch or dead motor), or they leak (sink flange, dishwasher inlet, discharge pipe or a cracked housing). The first two are often repairable; a leak from the bottom of the unit means the internal seal has failed and replacement is the only fix.

We repair and replace InSinkErator, Waste King, Moen, KitchenAid and GE disposals, including batch-feed models, and we make sure the dishwasher drain and air gap are connected correctly when we're done.

Houston note

Houston's older homes often have cast-iron drain lines that are already narrowed with scale. A disposal pushing fibrous waste (celery, corn husks, potato peels) into those lines is a recipe for a kitchen drain clog that looks like a disposal problem.

Garbage Disposal problems we fix

Pick the symptom that matches. Each page lists the likely causes in order and what you can check before we arrive.

Types we service

  • Continuous feed
  • Batch feed
  • Builder-grade 1/3 & 1/2 HP
  • Quiet 3/4 & 1 HP
  • Septic-assist models

What the visit looks like

1

Call, text or book online

Tell us the appliance, brand and symptom. A photo of the model tag lets us bring the exact part.

2

Diagnosis on site

The technician tests the appliance, finds the actual fault and quotes a flat price. $89 for the visit, credited when you approve.

3

Repaired, usually same visit

Most repairs finish from truck stock. If a part has to be ordered, we return as soon as it arrives. 1-year parts, 90-day labor warranty.

What garbage disposal repair costs

Jam clearing and reset at the low end; replacement labor plus the unit at the top, depending on the model you choose.

Diagnostic
$89, credited toward the repair
Typical repair
$95 – $280 parts and labor, quoted flat-rate before work starts
Warranty
1-year parts, 90-day labor

How our pricing works →

Garbage Disposal brands we repair

Parts for the most common brands ride on the truck; the rest are usually 1–3 business days.

Garbage Disposal repair questions

My disposal just hums. Can I fix it myself?
Often. Turn off power, insert a 1/4-inch hex (Allen) wrench in the socket on the bottom and work it back and forth to free the flywheel, remove whatever jammed it with tongs, then press the red reset button. If it still hums, the motor has seized.
Is a leaking disposal repairable?
A leak at the top (sink flange) or side (dishwasher inlet or discharge elbow) is repairable. A leak from the bottom vent holes means the internal seal has failed and the unit should be replaced.
Should I repair or replace a 10-year-old disposal?
Replace. Disposals are inexpensive relative to repair labor, and a 10-year-old unit is near the end of its life. We'll install a quieter, more powerful model the same visit.

Need garbage disposal repair today?

Call or text (713) 548-7587 for a same-day appointment anywhere in Greater Houston. $89 diagnostic, credited toward your repair.

Call nowBook online