- Home
- Problems
- Washer Repair
- Washer Not Agitating
Top-load washer not agitating?
A top loader that fills and drains but doesn't move the clothes has lost the connection between motor and agitator: agitator dogs, a coupling, a belt, a shifter or the transmission.
- Most likely cause
- Worn agitator dogs, a sheared motor coupling or a failed shift actuator
- Typical repair time
- One visit, 30–60 minutes
- Service call
- $89 diagnostic, credited to the repair
Why it's happening, in order of likelihood
Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.
- 1
Agitator dogs / cam
On dual-action agitators, the small plastic dogs inside the top half wear smooth; the top of the agitator spins freely and the clothes just float.
- 2
Motor coupling
Sheared coupling on Whirlpool direct-drive machines; motor runs, nothing moves.
- 3
Shift actuator
On newer impeller machines the actuator fails to engage agitate mode.
- 4
Drive belt
Belt-driven machines with a broken or slipped belt.
- 5
Lid switch
Some older machines agitate only with the lid switch closed.
- 6
Transmission
Internal failure; agitates one way or not at all. Often not worth repairing on budget machines.
Check these before you call
Safe, no-tools checks. If none of them solves it, the next step is a technician.
- Grab the top of the agitator and twist: if it ratchets freely both ways, the dogs are worn.
- Listen for the motor running during the wash portion.
- Check that the lid switch clicks.
Parts we typically replace
- Agitator dogs / repair kit
- Motor coupling
- Shift actuator
- Drive belt
- Lid switch
- Transmission
Brand-specific notes
- WhirlpoolWhirlpool, Kenmore and Roper dual-action agitators use an inexpensive dog kit.
- GE AppliancesGE Hydrowave top loaders fail the mode shifter.
Repair or replace?
Dogs, couplings and actuators are repairs. A transmission on an old budget washer is usually a replace.
What happens on the visit
Describe the symptom
Tell us the brand, model and what it's doing. A photo of the model tag helps.
We diagnose, you approve
$89 diagnostic, credited to the repair. Flat-rate quote before any work.
Fixed, usually that visit
Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.
Questions about this problem
Why does my impeller washer barely move the clothes?
Related washing machine problems
Washer Not Draining
An obstructed or failed drain pump.
See causes & fixesWasher Not Spinning
A failed lid lock, door lock or drive component.
See causes & fixesWasher Leaking Water
A torn door boot (front load) or a failed drain pump or hose.
See causes & fixesWasher Won't Start
A failed lid lock or door lock, or a control board.
See causes & fixesWasher Not Filling
Clogged inlet screens or a failed water inlet valve.
See causes & fixesWasher Shaking or Walking
Worn suspension rods (top load) or shock absorbers (front load).
See causes & fixes