- Home
- Problems
- Oven & Range Repair
- Oven Won't Turn Off or Overheats
Oven won't turn off or runs too hot?
An oven that keeps heating after it's turned off, or that overshoots badly, has a stuck relay, a shorted sensor or a failed control. Shut the breaker off and call; this one shouldn't wait.
- Most likely cause
- A stuck relay on the control board or a shorted temperature sensor
- Typical repair time
- One visit, 30–60 minutes
- Service call
- $89 diagnostic, credited to the repair
Why it's happening, in order of likelihood
Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.
- 1
Control board relay stuck closed
The bake relay welds shut and the element or igniter stays on.
- 2
Temperature sensor shorted
The control reads a low temperature and keeps calling for heat, often throwing an F2 or F10 code.
- 3
Infinite switch stuck (burners)
A surface burner that won't turn off is the knob switch.
- 4
Gas valve stuck open (gas)
Rare and serious; shut off the gas.
Check these before you call
Safe, no-tools checks. If none of them solves it, the next step is a technician.
- Turn off the breaker or gas supply.
- Note any error code before cutting power.
Parts we typically replace
- Control board
- Oven temperature sensor
- Infinite switch
- Safety gas valve
Brand-specific notes
- FrigidaireFrigidaire F10 is runaway temperature: sensor or board.
- GE AppliancesGE F2 is over-temperature.
Repair or replace?
A repair, done promptly.
What happens on the visit
Describe the symptom
Tell us the brand, model and what it's doing. A photo of the model tag helps.
We diagnose, you approve
$89 diagnostic, credited to the repair. Flat-rate quote before any work.
Fixed, usually that visit
Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.
Questions about this problem
Is it safe to use an oven that overheats?
Related oven, range & stove problems
Oven Not Heating
A weak gas igniter or a burned-out bake element.
See causes & fixesOven Temperature Not Accurate
A drifted temperature sensor or a weak igniter.
See causes & fixesElectric Stove Burner Not Working
A failed surface element or infinite switch.
See causes & fixesGas Burner Won't Light or Keeps Clicking
Moisture or debris on the spark electrode, or a failed igniter switch.
See causes & fixesOven Door Locked
A failed door lock motor or a blown thermal fuse after self-clean.
See causes & fixesBroiler Not Working
A failed broil element or broil igniter.
See causes & fixes