Codes appear on the oven display as F followed by a number (F2, F3, F7, F9), sometimes with a second code on newer controls. GE's advice is to disconnect power for 30 seconds; a code that returns needs service.
- Home
- Brands
- GE Appliances
- Range & Oven
GE Appliances Ranges, wall ovens & cooktops: error codes & what they mean
8 codes explained for JB / JBS / JGB / JGBS, JS / JGS / PGS / PSS / PHS, JT / JK / PT / PK models, with the part or problem behind each one. Same-day oven, range & stove repair across Houston.
Models covered
Find the model number on the rating plate. Refrigerators: inside the fresh-food section on the upper left wall. Washers: under the lid or behind the control panel. Dryers: inside the door. Dishwashers: on the tub rim or door edge. Ranges: on the frame behind the drawer or door.
- JB / JBS / JGB / JGBS (freestanding)Electric (JB645RKSS, JB735SPSS, JBS60DKWW) and gas (JGB635REKSS, JGB735SPSS, JGBS66REKSS) freestanding ranges.
- JS / JGS / PGS / PSS / PHS (slide-in)Electric, gas and induction slide-ins (JS760SPSS, JGS760SPSS, PGS930YPFS, PHS930YPFS).
- JT / JK / PT / PK (wall ovens)Single, double and combination wall ovens (JTS5000SNSS, JKD5000SNSS, PTD7000SNSS).
- JP / JGP / PHP (cooktops)Electric, gas and induction cooktops.
Example model numbers
- JB645RKSS
- JB735SPSS
- JGB635REKSS
- JGB735SPSS
- JS760SPSS
- JGS760SPSS
- JTS5000SNSS
- PGS930YPFS
GE oven codes are short and consistent across decades: F2 is over-temperature, F3 and F4 are the oven sensor, F7 is a stuck key, F9 is the door lock, and F0/F1/F5 are keypad or control faults. On gas ranges the frequent failures show no code: a weak oven igniter that glows but never lights, and a surface burner that clicks without igniting.
GE Appliances range & oven error codes
Filter by code or symptom. Meanings are the documented common ones for these platforms; the tech sheet inside your appliance is authoritative for your exact model.
| Code | What it means | What usually fixes it |
|---|---|---|
F0 / F1 | Keypad or control board fault (stuck key, failed touchpad or ERC) | Keypad ribbon or electronic range control. |
F2 | Oven over-temperature | Oven sensor, stuck relay or control. |
F3 | Oven temperature sensor open | Oven sensor or harness. |
F4 | Oven temperature sensor shorted | Oven sensor. |
F5 | Control board fault (watchdog / relay) | Electronic range control. |
F7 | Shorted or stuck key | Keypad or control. |
F9 | Door lock / latch circuit fault | Lock motor, latch switch or control. |
FC | Door lock circuit fault (some models) | Lock switch or control. |
No match in the main table; check the tables below or text us the code.
Messages that aren't faults
Things the display shows that don't mean a part has failed.
| Code | What it means | What usually fixes it |
|---|---|---|
PF | Power failure | Reset the clock. |
Lock / Loc | Control lock on | Hold the lock key 3 seconds. |
Sabbath / Sb | Sabbath mode | Exit per the manual. |
Common failures on these models
- Oven temperature sensor faults (F3 / F4)
- Keypad and control faults from steam and spills (F0 / F1 / F7)
- Door lock faults after self-clean (F9)
- Weak oven igniters on JGB gas ranges
- Bake element burnout on JB electric ranges
- Spark module and igniter switch faults on gas cooktops
Before you call
- Write down or photograph the exact code and which lights are lit before you reset anything; a reset can erase it.
- Reset once: switch the breaker off for 60 seconds, then back on. A code that returns is real.
- Check the basics the code points to (water valves open, drain hose not kinked, door fully closed, 240V breaker not half-tripped) using the table above.
- Text the code and a photo of the model tag to (713) 548-7587 so we arrive with the part.