Houston · Harris, Fort Bend & Montgomery counties
Mon–Sat 7am–7pmSame-day & next-day appointments (713) 548-7587
  1. Home
  2. Problems
  3. Oven & Range Repair
  4. Gas Burner Won't Light or Keeps Clicking
Oven & Range Repair · Houston, TX

Gas burner won't light or keeps clicking?

A burner that clicks and never lights, or clicks constantly even when off, is almost always a wet or dirty electrode, a failed igniter switch or a spark module. Clogged burner ports after a boil-over cause the same thing.

One visit, 30–45 minutes Same-day in most of Houston 1-year parts, 90-day labor warranty
Safety first. If you smell gas and no burner is on, don't use switches or lights. Open windows, leave the house and call CenterPoint Energy at 888-876-5786 or 911 from outside.
Quick diagnosis
Most likely cause
Moisture or debris on the spark electrode, or a failed igniter switch
Typical repair time
One visit, 30–45 minutes
Service call
$89 diagnostic, credited to the repair

Why it's happening, in order of likelihood

Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.

  1. 1

    Wet or dirty spark electrode

    After cleaning or a boil-over, moisture on the ceramic electrode shorts the spark. It dries in an hour; crusted food must be cleaned off.

  2. 2

    Clogged burner ports

    Debris in the burner cap or head blocks gas from reaching the spark; the burner clicks and clicks.

  3. 3

    Igniter switch

    The switch behind the knob sticks closed; all burners click constantly even when off. Switches are replaced as a set on many ranges.

  4. 4

    Spark module

    No spark at any burner, or weak sparks.

  5. 5

    Burner cap misaligned

    A cap sitting crooked after cleaning prevents ignition.

  6. 6

    Gas supply

    A closed valve or a regulator problem; usually affects all burners.

Check these before you call

Safe, no-tools checks. If none of them solves it, the next step is a technician.

  • Let the cooktop dry fully after cleaning.
  • Seat the burner caps properly.
  • Clean the burner ports with a straightened paper clip.
  • If one burner lights from a match but not the spark, the electrode or switch is the problem.

Parts we typically replace

  • Spark electrode
  • Igniter switch set
  • Spark module
  • Burner head & cap

Brand-specific notes

  • WolfWolf and Viking rangetops: igniter switches and spark modules are the usual replacement.
  • ThermadorThermador Star Burners: electrodes and switches.
  • GE AppliancesGE and Samsung ranges: spark module when all burners fail.

Repair or replace?

A repair.

What happens on the visit

1

Describe the symptom

Tell us the brand, model and what it's doing. A photo of the model tag helps.

2

We diagnose, you approve

$89 diagnostic, credited to the repair. Flat-rate quote before any work.

3

Fixed, usually that visit

Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.

Questions about this problem

Why do all my burners click when I turn one on?
That's normal; they share a spark module. Clicking when all knobs are off is not normal and means a stuck igniter switch or moisture.
Is a yellow flame a problem?
Yes. A yellow, sooty flame means poor air mixture or a dirty burner; have it checked.

Related oven, range & stove problems

Oven, Range & Stove trouble? Same-day help.

Call or text (713) 548-7587 for a same-day appointment anywhere in Greater Houston. $89 diagnostic, credited toward your repair.

Call nowBook online