Houston · Harris, Fort Bend & Montgomery counties
Mon–Sat 7am–7pmSame-day & next-day appointments (713) 548-7587
  1. Home
  2. Brands
  3. Whirlpool
  4. Range & Oven
Whirlpool · Oven & Range Repair · error codes

Whirlpool Ranges, wall ovens & cooktops: error codes & what they mean

16 codes explained for WFE / WEE / WEG / WFG, WOS / WOD / WOC / WOEC, WCE / WCG / WCC models, with the part or problem behind each one. Same-day oven, range & stove repair across Houston.

4 model series Most repairs in one visit 1-year parts, 90-day labor warranty

Models covered

Find the model number on the rating plate. Washers: under the lid or inside the door frame. Dryers: inside the door. Refrigerators: inside the fresh-food compartment on the wall. Dishwashers: on the door edge. Ranges: on the frame behind the door or the drawer.

  • WFE / WEE / WEG / WFGElectric freestanding (WFE505W0HS, WFE525S0JS), electric and gas slide-in (WEE750H0HZ, WEG750H0HZ), gas freestanding (WFG505M0BS, WFG525S0JS).
  • WOS / WOD / WOC / WOECSingle, double and combination wall ovens (WOS51EC0HS, WOD51EC0HS, WOC54EC0HS, WOES7030PZ).
  • WCE / WCG / WCC (cooktops)Electric, gas and ceramic cooktops (WCE55US0HB, WCG55US0HS).
  • Older RF / GS / RBS / GBS (1998–2012)Ranges and wall ovens with the F1–F9 code set.

Example model numbers

  • WFE505W0HS
  • WFE525S0JS
  • WEE750H0HZ
  • WFG505M0BS
  • WFG525S0JS
  • WOS51EC0HS
  • WOD51EC0HS
  • WCE55US0HB
How codes are displayed

Current controls show F# E# pairs (F3 E0). Older electronic range controls show F1–F9. The code often appears during or right after self-clean, when the lock, sensor and thermal fuse are stressed.

Whirlpool ovens (shared with Maytag, KitchenAid, JennAir and Amana) report sensor faults as F3 E0 / F3 E1, control and keypad faults as F1 and F2 codes, and door lock problems as F5 codes. Most appear for the first time right after a self-clean cycle, which stresses the lock, the sensor and the thermal fuse.

Gas ranges on this platform have failures that show no code: a weak oven igniter that glows but never opens the valve, and burners that click without lighting. Those are the two most common gas range repairs in Houston.

Whirlpool range & oven error codes

Filter by code or symptom. Meanings are the documented common ones for these platforms; the tech sheet inside your appliance is authoritative for your exact model.

CodeWhat it meansWhat usually fixes it
F1 E0 / F1 E1Control board fault (EEPROM / control failure)Electronic oven control.
F2 E0Shorted keypad / stuck keyKeypad membrane or control.
F2 E1Keytail disconnectedRibbon cable reseated or keypad.
F3 E0Oven temperature sensor openOven sensor.
F3 E1Oven temperature sensor shortedOven sensor or harness.
F3 E2 / F3 E3Oven over-temperature (bake / clean)Sensor, relay board or control.
F5 E0 / F5 E1Door switch / latch faultDoor lock assembly or switch.
F5 E2 / F5 E3Latch won't lock / won't unlockDoor lock motor or switch.
F6 E0 / F6 E1Communication or relay board faultRelay board or harness.
F9 E0Door lock circuit fault (older models)Door lock.

Older F1–F9 codes

CodeWhat it meansWhat usually fixes it
F1Control board faultElectronic range control.
F2Oven temperature too highSensor or relay.
F3 / F4Oven sensor open / shortedOven sensor.
F5Door lock / latch faultLatch assembly.
F7Stuck keyKeypad.
F9Door latch circuit faultLatch or lock motor.

Messages that aren't faults

Things the display shows that don't mean a part has failed.

CodeWhat it meansWhat usually fixes it
PFPower failureReset the clock.
Loc / Control LockKeypad lockedHold the lock key 3 seconds.

Common failures on these models

  • Oven temperature sensor faults (F3 E0 / F3 E1)
  • Door lock motor and latch switch faults after self-clean (F5 E1 / F5 E2)
  • Blown thermal fuses after self-clean (dead oven, no code)
  • Weak oven igniters on gas ranges
  • Control board relay failures (F1 E0 / F6 E1)
  • Spark module and igniter switch faults on cooktops

Before you call

  • Write down or photograph the exact code and which lights are lit before you reset anything; a reset can erase it.
  • Reset once: switch the breaker off for 60 seconds, then back on. A code that returns is real.
  • Check the basics the code points to (water valves open, drain hose not kinked, door fully closed, 240V breaker not half-tripped) using the table above.
  • Text the code and a photo of the model tag to (713) 548-7587 so we arrive with the part.

Whirlpool range & oven questions

My Whirlpool oven shows F3 E0 and won't heat.
The oven temperature sensor reads open. We replace the sensor from inside the cavity; it takes about 30 minutes.
The oven locked after self-clean and shows F5 E1.
The door latch didn't report its position: lock motor, latch switch or the control relay. We release the door safely and replace what failed.
Do you repair every Whirlpool range & oven model?
Yes, out of warranty. Text us the full model number from the rating plate and the code on the display, and we'll bring the right part. If the unit is still under Whirlpool's factory warranty, call the manufacturer first.

Related oven, range & stove problems

Whirlpool showing a code? We'll bring the part.

Text the code and a photo of the model tag to (713) 548-7587. Same-day appointments across Houston.

Call nowBook online