Houston · Harris, Fort Bend & Montgomery counties
Mon–Sat 7am–7pmSame-day & next-day appointments (713) 548-7587
  1. Home
  2. Problems
  3. Dryer Repair
  4. Dryer Not Turning On
Dryer Repair · Houston, TX

Dryer not turning on or won't start?

A completely dead dryer, or one that lights up but won't start when you press the button, usually comes down to a thermal fuse, door switch, start switch, belt switch or a failed motor. All are same-visit repairs.

One visit, 30–60 minutes Same-day in most of Houston 1-year parts, 90-day labor warranty
Quick diagnosis
Most likely cause
A blown thermal fuse or a failed door switch
Typical repair time
One visit, 30–60 minutes
Service call
$89 diagnostic, credited to the repair

Why it's happening, in order of likelihood

Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.

  1. 1

    Thermal fuse

    On many Whirlpool-built dryers the thermal fuse is in the motor circuit; when it blows, the dryer is completely dead. Caused by overheating from a restricted vent.

  2. 2

    Door switch

    If the dryer doesn't know the door is closed it won't start; the drum light may still work.

  3. 3

    Start switch or control board

    The start button fails, or the board doesn't energize the motor relay.

  4. 4

    Belt switch

    On many models a broken belt opens a switch that stops the motor; the dryer hums or does nothing.

  5. 5

    Drive motor

    A hum then silence, or a click, means a seized motor or failed start winding.

  6. 6

    Power: breaker, cord, terminal block

    A burned terminal block at the cord is common on electric dryers and a fire hazard.

Check these before you call

Safe, no-tools checks. If none of them solves it, the next step is a technician.

  • Check the breaker and the cord connection.
  • Press the door switch by hand and listen for a click.
  • Try turning the drum by hand with the door open; if it spins freely with no resistance, the belt may be broken.
  • Hold start for 3–5 seconds; some models require a long press.

Parts we typically replace

  • Thermal fuse
  • Door switch
  • Start switch
  • Belt switch
  • Drive motor
  • Terminal block
  • Control board

Brand-specific notes

  • WhirlpoolWhirlpool-built dryers (including Kenmore 110 and Maytag) go completely dead when the thermal fuse blows.
  • SamsungSamsung dryers with a dead panel often have a failed main board or a tripped thermal fuse on the heater housing.

Repair or replace?

A repair.

What happens on the visit

1

Describe the symptom

Tell us the brand, model and what it's doing. A photo of the model tag helps.

2

We diagnose, you approve

$89 diagnostic, credited to the repair. Flat-rate quote before any work.

3

Fixed, usually that visit

Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.

Questions about this problem

My dryer hums but won't turn. What is it?
A broken belt, a seized drum roller, or a motor that can't start. Don't keep trying; the motor overheats.

Related dryer problems

Dryer trouble? Same-day help.

Call or text (713) 548-7587 for a same-day appointment anywhere in Greater Houston. $89 diagnostic, credited toward your repair.

Call nowBook online