- Home
- Problems
- Garbage Disposal Repair
- Garbage Disposal Humming but Not Spinning
Garbage disposal humming but not spinning?
A hum with no grinding means the motor has power but the flywheel is jammed, or the motor has seized. Jams are often freed in minutes; a seized motor means replacement.
- Most likely cause
- A jammed flywheel
- Typical repair time
- One visit, 20–45 minutes
- Service call
- $89 diagnostic, credited to the repair
Why it's happening, in order of likelihood
Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.
- 1
Jammed flywheel
A bone, fruit pit, utensil or glass is wedged between the impeller and the grind ring.
- 2
Seized motor bearings
After years of use, or after running dry, the bearings seize. The disposal hums and trips its reset.
- 3
Burned-out start winding
The motor can't start under load.
Check these before you call
Safe, no-tools checks. If none of them solves it, the next step is a technician.
- Turn off power at the switch and breaker.
- Insert a 1/4-inch hex (Allen) wrench in the socket on the bottom of the unit and work it back and forth to free the flywheel.
- Use tongs (never your hand) to remove the object from the chamber.
- Press the red reset button on the bottom and restore power.
Parts we typically replace
- Disposal unit (replacement)
Brand-specific notes
- InSinkEratorInSinkErator units have the hex socket on the bottom center; Badger models jam more often than Evolution models.
- Waste KingWaste King units lack a hex socket; jams are freed from above with a wooden handle.
Repair or replace?
A jam is a repair. A seized motor means replacing the disposal, usually with a quieter, more powerful unit.
What happens on the visit
Describe the symptom
Tell us the brand, model and what it's doing. A photo of the model tag helps.
We diagnose, you approve
$89 diagnostic, credited to the repair. Flat-rate quote before any work.
Fixed, usually that visit
Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.