- Home
- Problems
- Garbage Disposal Repair
- Garbage Disposal Not Turning On
Garbage disposal not turning on?
Silence when you flip the switch means no power is reaching the motor: a tripped reset, a tripped breaker or GFCI, a bad wall switch, a loose cord connection or a dead motor. We find it quickly.
- Most likely cause
- A tripped reset button or breaker
- Typical repair time
- One visit, 20–40 minutes
- Service call
- $89 diagnostic, credited to the repair
Why it's happening, in order of likelihood
Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.
- 1
Reset button tripped
The red button on the bottom pops out after an overload.
- 2
Breaker or GFCI tripped
Kitchen circuits trip; the disposal may share a GFCI with counter outlets.
- 3
Wall switch or air switch
Switches wear; air switches on the counter lose their button or tubing.
- 4
Cord or wiring connection
A loose wire in the disposal's wiring compartment or a failed plug.
- 5
Dead motor
If power reaches the unit and it does nothing, the motor is done.
Check these before you call
Safe, no-tools checks. If none of them solves it, the next step is a technician.
- Press the red reset button on the bottom.
- Check the breaker and reset any kitchen GFCI outlets.
- If the disposal plugs into an outlet under the sink, test the outlet with a lamp.
Parts we typically replace
- Wall switch
- Air switch
- Power cord
- Disposal unit (replacement)
Repair or replace?
Power and switch faults: repair. Dead motor: replace.
What happens on the visit
Describe the symptom
Tell us the brand, model and what it's doing. A photo of the model tag helps.
We diagnose, you approve
$89 diagnostic, credited to the repair. Flat-rate quote before any work.
Fixed, usually that visit
Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.