Codes show on the display as E:xx on most models and as four-digit codes (E3100) on the newest ones; the two formats are listed together below. Models without a display flash cycle lights. E15 is the leak-protection switch in the base pan and will not clear until the pan is dry.
Bosch Dishwashers (100–800 Series & Benchmark): error codes & what they mean
21 codes explained for SHE / SHX / SHS, SHP / SHPM / SHX, SHPM88 / SHXM88 / SHP878 / SHX878 models, with the part or problem behind each one. Same-day dishwasher repair across Houston.
Models covered
Find the model number on the rating plate. Dishwashers: on the top edge of the door, with the E-Nr. (model) and FD (date) numbers. Washers and dryers: inside the door. Refrigerators: inside on the left wall.
- SHE / SHX / SHS (100 & 300 Series)SHE3AR72UC, SHE3AEM5N, SHEM63W55N, SHXM63W55N, SHSM63W55N, SHS863WD5N.
- SHP / SHPM / SHX (500 Series)SHPM65Z55N, SHP865ZD5N, SHX65CM5N, SHPM65W55N.
- SHPM88 / SHXM88 / SHP878 / SHX878 (800 Series)SHPM88Z75N, SHXM88Z75N, SHP878ZD5N, SHX878ZD5N with CrystalDry.
- SHV89 / SHX89 / SHP9 (Benchmark)SHV89PW73N, SHX89PW75N, SHP9PCM5N.
- SPE / SPV / SPX (18-inch compact)SPE53B55UC, SPV68U53UC, SPX68U55UC.
- SHU / SHV / SHE4x (2000–2012)Older models with fewer displayed codes.
Example model numbers
- SHEM63W55N
- SHXM63W55N
- SHPM65Z55N
- SHP865ZD5N
- SHPM88Z75N
- SHXM88Z75N
- SHV89PW73N
- SPE53B55UC
Bosch dishwashers are the most common premium dishwasher in Houston, and their codes are the most useful in the industry. E24 and E25 are drain faults (hose, filter, check valve, pump cover, disposal knockout), E22 is a blocked filter, E09 is the heater, and E15 means water has reached the base pan and tripped the leak-protection switch.
E15 is the one to respect. Tilting the machine to drain the pan and resetting it works until the leak refills the pan. We find the source (sump seal, door gasket, heater housing, hose) and fix it so E15 stays gone. E12 (limescale) is a Houston special: our water scales the heat pump, and descaling plus rinse aid restores drying.
Bosch dishwasher error codes
Filter by code or symptom. Meanings are the documented common ones for these platforms; the tech sheet inside your appliance is authoritative for your exact model.
| Code | What it means | What usually fixes it |
|---|---|---|
E01 / E0100 | Heat pump motor circuit fault at control | Power module. |
E02 / E03 / E0103 / E0107 | Control board relay fault | Power module. |
E04 / E0105 | Heater electronics fault found in self-test | Power module. |
E05 / E0106 | Wash arm diverter circuit fault | Diverter or power module. |
E06 / E8000 | Door sensor circuit fault | Door switch. |
E07 / E2130 | Zeolite (CrystalDry) fan motor fault | Drying fan. |
E09 / E20 / E2030 / E6001 | Heat pump internal heater fault | Flow-through heater / pump assembly. |
E10 / E2120 | Zeolite chamber heater fault | Zeolite heater. |
E12 / E2060 | Limescale in heat pump | Descale; softener salt on models with one. Houston water makes this one common. |
E14 / E3000 | Flow meter failure or filling problem | Flow meter or inlet valve. |
E15 / E3100 | Water in base; leak protection active | Find the leak (sump seal, gasket, hose, heater); never just tip and reset. |
E16 / E17 / E3300 / E3400 | Water cannot enter correctly | Inlet hose, valve, aquastop. |
E18 / E3200 | Water level too low or not pumped correctly | Supply flow, inlet valve. |
E19 / E6900 | Detergent dispenser solenoid fault | Dispenser. |
E21 / E6002 | Heat pump blocked | Debris in the circulation pump. |
E22 / E9240 | Filter blocked | Clean the filter. |
E23 / E6101 | Drain pump blocked or faulty | Drain pump. |
E24 / E6103 | Not draining: blocked filter, hose, cover or disposal knockout | Drain path and pump cover. |
E25 / E6102 | Drain pump blocked or pump cover loose | Clear the pump; reseat the cover. |
E27 / E9001 | House voltage too low | Electrician if it repeats. |
E6160 | PowerControl lower spray arm reference position not found | Spray arm drive. |
No match in the main table; check the tables below or text us the code.
Messages that aren't faults
Things the display shows that don't mean a part has failed.
| Code | What it means | What usually fixes it |
|---|---|---|
H:01–H:24 | Delay start timer | Press +/– until h:00. |
Red floor light / Check water / Salt / Rinse aid | Status indicators | Refill salt or rinse aid; Check water means supply. |
3 or 5 beeps | Leak detected / water in base | Treated as E15. |
Common failures on these models
- Leak-protection trips (E15) from sump seals, gaskets and hoses
- Drain faults (E24 / E25) from check valves, pump covers and disposal knockouts
- Flow-through heater faults (E09) leaving dishes cold and wet
- Limescale (E12) from Houston water
- Water inlet and flow meter faults (E14 / E17 / E18)
- Drain pump failures (E23)
Before you call
- Write down or photograph the exact code and which lights are lit before you reset anything; a reset can erase it.
- Reset once: switch the breaker off for 60 seconds, then back on. A code that returns is real.
- Check the basics the code points to (water valves open, drain hose not kinked, door fully closed, 240V breaker not half-tripped) using the table above.
- Text the code and a photo of the model tag to (713) 548-7587 so we arrive with the part.