- Home
- Problems
- Microwave Repair
- Microwave Turntable Not Turning
Microwave turntable not turning?
A plate that sits still while the microwave runs is usually a failed turntable motor, a broken coupler or a roller ring that's off its track. Food heats unevenly until it's fixed.
- Most likely cause
- A failed turntable motor or broken coupler
- Typical repair time
- One visit, 20–40 minutes
- Service call
- $89 diagnostic, credited to the repair
Why it's happening, in order of likelihood
Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.
- 1
Turntable motor
The small synchronous motor under the floor fails or its gears strip.
- 2
Coupler or drive hub
The plastic coupler on the motor shaft cracks and spins without turning the plate.
- 3
Roller ring and track
Food debris or a misplaced ring stops rotation.
- 4
Control board or turntable switch
Some models let you turn the turntable off; check the setting.
Check these before you call
Safe, no-tools checks. If none of them solves it, the next step is a technician.
- Remove the plate and ring, clean the track and reseat them.
- Check whether a turntable on/off setting was changed.
- Spin the coupler by hand; if it turns freely and the plate doesn't, the coupler is broken.
Parts we typically replace
- Turntable motor
- Coupler
- Roller ring
- Glass tray
Repair or replace?
A repair on built-in and over-the-range units.
What happens on the visit
Describe the symptom
Tell us the brand, model and what it's doing. A photo of the model tag helps.
We diagnose, you approve
$89 diagnostic, credited to the repair. Flat-rate quote before any work.
Fixed, usually that visit
Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.