- Home
- Problems
- Microwave Repair
- Microwave Sparking
Microwave sparking or arcing inside?
Sparks inside the cavity come from metal, a damaged waveguide cover, chipped paint or a worn rack support. Stop using it; arcing damages the magnetron and can start a fire.
- Most likely cause
- A burned waveguide cover or metal in the cavity
- Typical repair time
- One visit, 20–45 minutes
- Service call
- $89 diagnostic, credited to the repair
Why it's happening, in order of likelihood
Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.
- 1
Waveguide cover
The mica or plastic plate on the cavity wall gets greasy, burns and arcs. Inexpensive to replace.
- 2
Metal in the cavity
Foil, twist ties, gold-rimmed dishes, a fork.
- 3
Chipped interior paint
Exposed metal at a chip arcs; it can be touched up with microwave cavity paint if small.
- 4
Rack supports
Metal rack clips that have lost their coating.
- 5
Magnetron failure
Arcing from the magnetron antenna, often with a burning smell.
Check these before you call
Safe, no-tools checks. If none of them solves it, the next step is a technician.
- Remove racks and any metal; check the waveguide cover for burn marks.
- Look for chips in the cavity paint.
Parts we typically replace
- Waveguide cover
- Rack supports
- Cavity paint
- Magnetron
Repair or replace?
A repair unless the cavity is badly burned through.
What happens on the visit
Describe the symptom
Tell us the brand, model and what it's doing. A photo of the model tag helps.
We diagnose, you approve
$89 diagnostic, credited to the repair. Flat-rate quote before any work.
Fixed, usually that visit
Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.