- Home
- Problems
- Range Hood Repair
- Range Hood Fan Not Working
Range hood fan or light not working?
A hood that won't run, runs on one speed, hums without spinning or has lost its lights has a failed switch, capacitor, motor, control board or lamp holder. All are repairable without replacing the hood.
- Most likely cause
- A failed speed switch, capacitor or blower motor
- Typical repair time
- One visit, 30–75 minutes
- Service call
- $89 diagnostic, credited to the repair
Why it's happening, in order of likelihood
Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.
- 1
Speed switch or control board
Mechanical switches wear; touch control boards fail, often with the lights too.
- 2
Run capacitor
The motor hums but won't start; the capacitor is cheap.
- 3
Blower motor
Seized bearings or a burned winding; the whole blower may be replaced.
- 4
Lamp holders or LED driver
Heat kills halogen sockets and LED drivers.
- 5
Grease-clogged blower wheel or filters
Not a failure, but it mimics a weak motor and strains it.
- 6
Stuck damper
Weak airflow with a running fan.
Check these before you call
Safe, no-tools checks. If none of them solves it, the next step is a technician.
- Wash the filters.
- Check the breaker and any wall switch.
- Listen: a hum with no spin is the capacitor or motor.
Parts we typically replace
- Blower motor
- Run capacitor
- Speed switch
- Control board
- Lamp holders / LED driver
- Damper
Brand-specific notes
- ZephyrZephyr: touch control boards and LED drivers.
- Broan-NuToneBroan: switches, capacitors and motors are inexpensive and in stock.
Repair or replace?
A repair.
What happens on the visit
Describe the symptom
Tell us the brand, model and what it's doing. A photo of the model tag helps.
We diagnose, you approve
$89 diagnostic, credited to the repair. Flat-rate quote before any work.
Fixed, usually that visit
Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.