- Home
- Problems
- Cooktop Repair
- Glass Cooktop Element Not Heating
Glass cooktop element not heating?
One zone dead on a radiant glass cooktop is almost always the radiant element itself, its limiter, or the switch or control that feeds it. The glass doesn't need to be replaced to fix it.
- Most likely cause
- A failed radiant element or infinite switch
- Typical repair time
- One visit, 30–60 minutes
- Service call
- $89 diagnostic, credited to the repair
Why it's happening, in order of likelihood
Our technicians test in roughly this order. The numbers reflect how often each cause turns out to be the fault on Houston service calls.
- 1
Radiant element
The ribbon element under the glass burns out, or its built-in limiter fails open.
- 2
Infinite switch or control
The knob switch or the electronic control board that cycles the element.
- 3
Wiring connector
A burned connector at the element terminal.
- 4
Hot surface indicator
If the light stays on, the indicator switch in the element has failed; not a heating fault.
Check these before you call
Safe, no-tools checks. If none of them solves it, the next step is a technician.
- Does the indicator light turn on? Light but no heat suggests the element; no light suggests the switch.
- Check whether the control lock is on.
Parts we typically replace
- Radiant element
- Infinite switch
- Control board
- Element wiring connector
Repair or replace?
A repair.
What happens on the visit
Describe the symptom
Tell us the brand, model and what it's doing. A photo of the model tag helps.
We diagnose, you approve
$89 diagnostic, credited to the repair. Flat-rate quote before any work.
Fixed, usually that visit
Common parts are on the truck. 1-year parts, 90-day labor warranty on the repair.